-
2011/06/09
-
2011/05/09
Spring Unit for Tendon driving system robots － GoseiAdjuster™
-
2011/03/08
-
2010/12/21
-
2010/12/01
-
2010/11/01
-
2010/08/04
Shokac Sensor was reported in 52 mediums such as Yahoo and Nikkan Kogyo newspaper
-
2010/08/04
-
2010/08/04
Entry into the market of Shokac sensor by concluding licensing agreement with Tokyo University
-
2010/08/02
2011/06/09Sensor Expo Japan 2011
Sensor Expo Japan 2011 will be held at Tokyo Big Sight, East Hall.
Date: July 13 (Wed) to July 15 (Fri)
Time: 10:00 ～17:00
2011/05/09Spring Unit for Tendon driving system robots － GoseiAdjuster™
For the structure that is close to the human being
～the robot can adjust the stiffness of the tendon (wire)～
There are two kinds of an axial driving system and the tendon driving system to a robot.
The axial driving system robot has made possible the movement high precise and high power by the combination of motor and gear.
On the other hand, the tendon driving system robot can realize more humanized movement due to its structure closer to human being.
These days, the development of the tendon drive robot attracts attention of consumer use robot.
Spring Unit, ’GoseiAdjuster™’, is set it up to the tendon (wire) of the tendon driving system robot. The GoseiAdjuster™ can react for external force, for example the robot can react softly because the parts are flexible.
The robot can adjust the hardness (stiffness) of the tendon (wire).
 | 【GoseiAdjuster™Rotary 】 Minimized friction structure by bearing makes life time of the wire improve. Furthermore, the attached angle sensor can measure tension of the tendon from an axial rotary angle. |
 | 【GoseiAdjuster™Add-On】 Comprising of few parts can make it low costs. In addition, the tendon driving system is add-on type, thus it is possible to adjust without the whole robot reconstituting.
|
Tel: 048-928-8751
E-mail:eigyo@satake-s.co.jp
2011/03/08Exhibition on Service Robot Manufacturing Technologies
July 13 - 15, 2011 (Wed. to Fri) 10:00 to 17:00
At Tokyo Big Sight, East Hall
Satake Precision Technology Co., Ltd will exhibit in the Service Robot Manufacturing Technologies.
2010/12/21We start to sell the trial product of Shokac Cube™.
Please contact us if you would like to see the demonstration. The data sheet of Shokac Cube™ is available in this website.
For inquiries, please contact us,
Tel: 03-3254-3121
E-mail: eigyo@satake-s.co.jp
2010/12/01Shokac Cube™ was exhibited in Sensor Expo Japan 2010.
In Sensor Expo Japan 2010, the ShokacCube was exhibited from 24th November 2010 to 26th November 2010. We are very grateful to you visit our booth, and the exhibition was finished in great successful. If you would like to see more details of ShokacCube , please download the data sheet in this website.
And if you have any inquiries, please contact us.
Tel: 03-3254-3121
Email:eigyo@satake-s.co.jp
 | Shokac Cube™(sponge sensor, polyurethane sensor) |
 | Demonstration Video of ShokacPad™ |
 | Exterior of our booth |
2010/11/01A renewal of homepage
Renew the homepage
2010/08/04Shokac Sensor was reported in 52 mediums such as Yahoo and Nikkan Kogyo newspaper
Shokac Sensor was reported in 52 mediums such as Yahoo and Nikkan Kogyo newspaper
2010/08/04Exhibition ShokacCube in Sensor Expo Japan 2010
Exhibition ShokacCube™ in Sensor Expo Japan 2010
2010/08/04Entry into the market of Shokac sensor by concluding licensing agreement with Tokyo University
Entry into the market of Shokac sensor by concluding licensing agreement with Tokyo University
2010/08/02Move Headoffice from Funabashi Chiba to Kanda Tokyo
Move Headoffice from Funabashi Chiba to Kanda Tokyo
For inquiries or further information, please call
Opening hours ： 9：00 ～ 18:00 （Sat, Sun, Public holidays are off）
